TASKI Jontec ESD F2k 2x5L - Statisk ledende gulvpolish

Varenr. 7512701
Gulvpolish til afledning af statisk elektricitet på gulve og overflader. Gulvpolishen giver en flot højglans og beskyttende film, som matcher en lang række vedligeholdelsesteknikker. Ideel løsning i områder med megen statisk elektricitet samt til ESD godkendte gulve. Giver en flot højglans og
Kontakt Diversey for yderligere information
Beskrivelse
Gulvpolish til afledning af statisk elektricitet på gulve og overflader. Gulvpolishen giver en flot højglans og beskyttende film, som matcher en lang række vedligeholdelsesteknikker. Ideel løsning i områder med megen statisk elektricitet samt til ESD godkendte gulve.

  • Giver en flot højglans og beskyttende film
  • Tilsat AvetranTM for at sikre den ledende evne
  • ESD godkendt af uafhængige laboratorier
  • Testet skridsikker i henhold til international standard (ASTM D-2047)


  • Letter rengøringen og beskytter gulvet mod nedslidning pga. trafik
  • Eliminerer risikoen for elektriske udladninger og medfølgende skader på elektrisk udstyr


  1. Treat only stripped and thoroughly rinsed and completely dry floors. Sparingly pour the product onto the floor and evenly spread it while still wet with a polish applicator in overlapping lanes of 1 - 1.5 m.
  2. Always apply 3 coats on the floor and always allow a 60 minutes minimum drying time in between two coats. After the last coat, allow minimum 60 minutes before traffic.
  3. To keep static dissipative capability and high gloss, recoat in medium to high traffic areas every 3 months and in low traffic areas every 6 months.
Maintenance:
  • Always allow a new treatment to cure for 48 hours before doing any type of wet maintenance.
  • Remove loose dirt with a dry mop on a daily base.
  • To ensure static dissipative capability, maintain with TASKI Jontec Destat.
  • Apply TASKI Jontec Destat 3 times a week for moderate to heavy traffic areas.
  • Apply once a week or as needed on light traffic areas. Do not rinse the floor after application.
  • In dry environments, apply 3 times a week to keep static dissipative readings low.
Specifikationer
General specifications
Logistical specifications
Chemical specifications
Vedhæftede filer
    Loading
    Loading